Materials Needed:
- CPU Fan normally with heat sink
- screwdriver
- heat sink compound
- screwdriver
- heat sink compound
Step 1
Choose an HP Pavilion DV5000 CPU fan and heat sink. If the processor does not come with its own CPU fan and heat sink, a fan appropriate for the processor must be bought. The fan appropriate to the computer may be seen on the computer’s manual. The available space inside the computer’s casing must be taken into consideration when installing a CPU fan.
Step 2
Shut down the computer and open the casing so that the CPU is exposed. Set aside screws, clips, and the cover for the CPU.
Step 3
Affix the CPU fan to its heat sink. This may have already been done. If the fan has not been attached, carefully fasten the fan and heat sink together by using the screws that came with the device.
Step 4
Attach the heat sink and fan to the CPU. The method of attaching the heat sink and fan to your CPU differs for CPU, CPU fan, and heat sink. A thin layer of heat sink compound may be spread on the CPU’s surface to ensure contact. Some fans and heat sinks attach to the CPU chip with a number of clips. Attach the fan gently with an even amount of force. Make sure not to damage the CPU and the motherboard of the computer.
Step 5
Connect the power cable of the heat sink and fan combination to the 3-pin power lead found on the computer’s motherboard. Search for a label 'fan' or 'CPU fan.'
Step 6
Replace computer cover and test the HP Pavilion DV5000 CPU fan.
没有评论:
发表评论